Glendale Epoxy Pros

Patio & Pool Deck Epoxy Coatings in Glendale, AZ

Pool deck and patio epoxy coatings in Glendale, AZ with slip-resistant texture and UV-stable finish. Free estimates.

15+ Years local experience
500+ Projects completed
Licensed & Insured

Serving Glendale and nearby communities.

A wet pool deck is a slip hazard waiting to happen. Direct desert sun on an uncovered patio fades a coating that isn't rated for UV exposure. Outdoor slabs face both problems at once, which is why a garage-rated coating doesn't automatically transfer outside.

Glendale Epoxy Pros builds outdoor coatings with slip-resistant texture and UV-stable topcoats specifically because this isn't a garage floor job with a different label.

What's included

What's Included

Typically included — surface prep, slip-resistant base coat, UV-stable topcoat.
Optional — decorative color pattern, cool-deck additive for heat reduction.
Customer prep — clear furniture and pool toys from the work area.

Want a clearer scope?

Get a Free Estimate Call (928) 662-5622

Patio & Pool Deck Epoxy Coatings

Installation Process

Outdoor Surface Inspection — The deck or patio gets checked for cracks, drainage, and wear.
Surface Cleaning — Pressure washing removes dirt, algae, and old coatings.
Crack & Joint Repair — Cracks and expansion joints get repaired to block water intrusion.
Slip-Resistant Base Coat — A textured base coat goes down for safer footing.
Decorative Finish Application — Color or pattern layers get added if wanted.
Weatherproof Topcoat — A UV-stable topcoat seals it against sun and water.

Questions about this?

Get a Free Estimate Call (928) 662-5622

Cost

Patio & Pool Deck Coating Cost

Exact pricing depends on square footage and current surface condition. Call for a free estimate.

Project type	Typical range	What’s included
Patio coating, 500–800 sq ft	$2,200–$4,000,	slip texture and UV topcoat.
Pool deck coating, 800–1,200 sq ft	$3,500–$6,500,	same system scaled up.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate Call (928) 662-5622

Patio & Pool Deck Epoxy Coatings

Material Options

UV-Stable Epoxy — resists fading from sun exposure, important on an uncovered patio that gets full sun most of the day.
Textured Slip-Resistant Coating — safer footing on a wet pool deck, built into the base coat rather than added later.

Questions about this?

Get a Free Estimate Call (928) 662-5622

Timeline

Outdoor work schedules around the weather more than garage jobs do.

01
Prep and repair
1 day
.
02
Base coat and texture
1 day
.
03
Topcoat cure
24–72 hours
longer in monsoon humidity.

Need a schedule that fits?

Get a Free Estimate Call (928) 662-5622

DIY vs pro

DIY vs Pro for Outdoor Coatings

DIY	Hire a pro
An indoor-rated epoxy kit might go on fine at first.	Outdoor-rated systems include UV blockers built into the resin, not just the topcoat.
Without UV stabilizers, it starts yellowing or chalking outdoors within a single summer.	Slip texture gets mixed into the coating at the right ratio, not sprinkled on after the fact.

Not sure DIY vs pro?

Get a Free Estimate Call (928) 662-5622

When to call

When to Call

A slippery wet deck surface is a safety issue, not just a cosmetic one. A visibly yellowed or chalky old coating means it's past its service life. Call Glendale Epoxy Pros for either situation.

Seeing warning signs?

Get a Free Estimate Call (928) 662-5622

FAQs

Pool Deck & Patio Coating FAQs

Is epoxy flooring slippery when wet, especially around a pool deck?

Standard smooth epoxy can be slippery wet. Pool deck systems use a textured slip-resistant additive built into the coating specifically to prevent that.

Will epoxy yellow or fade in direct Arizona sun on a patio?

Standard indoor epoxy can yellow under constant UV exposure. A UV-stable outdoor system is formulated to resist that fading over years of direct sun.

Does epoxy flooring hold up to Arizona monsoon humidity and dust?

Once fully cured, yes. The main concern is applying a coating right before a storm rolls in, which is why outdoor jobs get scheduled around the forecast.

How it works

Our process

Step 1
Outdoor Surface Inspection
The deck or patio surface is checked for cracks, drainage, and wear patterns.
Step 2
Surface Cleaning
Pressure washing removes dirt, algae, and old coatings before application.
Step 3
Crack & Joint Repair
Cracks and expansion joints are repaired to prevent future water intrusion.
Step 4
Slip-Resistant Base Coat
A textured base coat is applied to improve footing around pool areas.
Step 5
Decorative Finish Application
A decorative color or pattern layer is added for aesthetic appeal.
Step 6
Weatherproof Topcoat
A UV-stable topcoat seals the surface against sun and water exposure.

Materials

Materials and methods we use

UV-Stable Epoxy
A UV-resistant formula prevents fading from prolonged sun exposure.
Textured Slip-Resistant Coating
A textured finish provides safer footing on wet pool deck surfaces.
Cool-Deck Additive
An additive helps reduce surface heat buildup on sunny days.
Waterproof Membrane
A membrane layer blocks water penetration into the underlying concrete.
Decorative Color Pigment
Pigments create custom colors for a coordinated outdoor aesthetic.
Weather-Resistant Sealant
A sealant protects against freeze-thaw cycles and heavy rain exposure.