Glendale Epoxy Pros

Epoxy Floor Coatings in Glendale, AZ

Epoxy floor coatings for Glendale homes and businesses, UV-stable topcoats and self-leveling options. Free estimates available.

15+ Years local experience
500+ Projects completed
Licensed & Insured

Get a Free Estimate Call (928) 662-5622

Serving Glendale and nearby communities.

Epoxy floor coatings go beyond the garage. Interior rooms, indoor-outdoor transitions, and light commercial spaces all benefit from a sealed, smooth floor that handles foot traffic and spills better than bare concrete. Glendale's dust from monsoon season and the UV load from direct sun both shape which epoxy system makes sense for a given room.

Glendale Epoxy Pros builds each coating around the slab in front of us. An interior room with no sun exposure gets a different spec than a sunroom or covered patio transition.

What's included

What's Included

Typically included — surface prep and grinding, crack and pit repair, pigmented base coat, sealant topcoat.
Optional — metallic pigment accents, extra topcoat layer for high-traffic zones.
Customer prep — remove furniture or stored goods from the work area beforehand.

Want a clearer scope?

Get a Free Estimate Call (928) 662-5622

How it works

Our Coating Process

Step 1
Surface Condition Check
The concrete gets examined for moisture, cracks, and old coatings.
Step 2
Mechanical Surface Prep
Grinding or shot blasting strips old material and roughens the slab.
Step 3
Repair & Patch Work
Imperfections get patched for a level, consistent surface.
Step 4
Primer Coat Application
A primer seals the concrete and reduces bubbling later.
Step 5
Epoxy Layer Application
Epoxy gets rolled or squeegeed into a smooth surface.
Step 6
Cure & Quality Check
The finished coat gets inspected once fully cured.

Cost

Epoxy Flooring Cost in Glendale

Square footage and coating thickness drive most of the price swing. These are ballpark figures. Call for a free estimate sized to your actual square footage.

Project type	Typical range	What’s included
1,000 sq ft, standard epoxy	$2,500–$4,500,	prep, base coat, and sealant topcoat.
1,500 sq ft, standard epoxy	$3,500–$6,500,	same scope scaled to size.
Metallic or decorative upgrade	$5,500–$9,000,	custom pigment and extra labor.
Crack repair add-on	$300–$1,200,	depending on severity.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate Call (928) 662-5622

Epoxy Floor Coatings

Coating Material Options

Solid Color Epoxy — a pigmented epoxy gives a clean, even finish for interior floors that don't see direct sun.
UV-Stable Topcoat — an upgraded topcoat resists yellowing on rooms with skylights or south-facing glass.

Questions about this?

Get a Free Estimate Call (928) 662-5622

Timeline

Cure and Install Timeline

A typical job runs two to three days.

01
Prep and grinding
1 day
.
02
Base coat application
1 day
.
03
Topcoat and cure
24–72 hours
depending on coating type.

Need a schedule that fits?

Get a Free Estimate Call (928) 662-5622

Epoxy Floor Coatings

Downsides of Epoxy Flooring

It's fair to talk about the trade-offs. Standard epoxy can yellow if it sits in direct, unfiltered sun for years, which is why we steer sun-facing rooms toward a UV-stable topcoat instead. Epoxy is also unforgiving of moisture trapped under the slab, that's why moisture testing matters before coating goes down. And like any coating, it needs mechanical prep done right, acid etching alone on an older slab tends to fail early.

Questions about this?

Get a Free Estimate Call (928) 662-5622

FAQs

Epoxy Flooring FAQs

How much does it cost to epoxy 1000 square feet of flooring?

Expect $2,500 to $4,500 for a standard epoxy system on 1,000 square feet, including prep and a sealant topcoat. Decorative upgrades push that higher.

How much does a 1500 sq ft epoxy floor cost?

A 1,500 square foot job typically runs $3,500 to $6,500 with standard epoxy. Crack repair or metallic finishes add to that range.

What's the difference between epoxy and polyaspartic coatings for garages?

Epoxy cures slower but costs less upfront. Polyaspartic cures in hours instead of days and resists UV fading better, which matters more outdoors than in a shaded interior room.

Next step

Get a Free Estimate

Reach Glendale Epoxy Pros for a no-pressure estimate, or see Garage Floor Epoxy Coatings if your project is garage-specific. Home

Get a Free Estimate Call (928) 662-5622

Materials

Materials and methods we use

Solid Color Epoxy
A pigmented epoxy provides a clean, uniform appearance for interior floors.
Self-Leveling Epoxy
A self-leveling formula creates a smooth, flat finish over uneven concrete.
Epoxy Primer Sealer
A sealer coat penetrates the concrete to improve adhesion of the finish layer.
Metallic Pigment Additive
Metallic pigments create a dynamic, marbled visual effect in the finished floor.
UV-Stable Topcoat
A topcoat resists yellowing from sunlight exposure over time.
Industrial Degreaser
A degreasing agent is used to prepare the surface before coating application.